IMPER STANDARD
IMPER STANDARD
Imper STANDARD is a roll roofing and waterproofing bitumen-containing material. Imper STANDARD is obtained by double-sided application of a bitumen binder, consisting of bitumen, polymer modifier and mineral filler, onto a fiberglass (fiberglass, fiberglass) base, followed by application of protective layers on both sides of the canvas. Coarse-grained dressing and polymer film are used as protective layers. Depending on the protective layer on the front side of the web and the area of application, Imper STANDARD is produced in the following grades:
Imper STANDARD B - a roofing material with coarse-grained dressing on the front side and a polymer film on the overlaid side of the web; it is used for the device of the top layer in a multi-layer roofing carpet;
Imper STANDARD N - roofing and waterproofing material with a polymer film; used as an intermediate and bottom layer in a multi-layer roofing carpet, as well as for waterproofing building structures.
Item property:
Roofing material
Bottom Layer Material
Top Layer Material
| Indicator names | Unit edit | Criterion | Imper STANDARD (T) * N | Imper STANDARD (X) * N | Imper STANDARD (T) * B | Imper STANDARD (X) * B |
| Mass | kg / m2 | ± 5% ** | 3.0 | 4.0 | ||
|
Maximum tensile strength: along Across |
Н | ± 200 *** |
800 800 |
550 - |
1000 1000 |
550 - |
| Mass of binder on the weld side | kg/m2 | at least | 1.5 | |||
| Water absorption within 24 hours | % by weight | no more | 1 | |||
| Loss of topping | kg/m2 | ± 5% ** | - | 15 | ||
| Flexibility temperature on the beam R = 25 mm | kg/m2 | ± 5% ** | 0 | |||
| Water resistance at a pressure of 10 kPa | withstands | |||||
| Water resistance at a pressure of 0.2 MPa, for 2 h | withstands | - | ||||
| Heat resistance, not less than °С | + 80 | |||||
| Length x Width, m | 15x1 | 10x1 | ||||
| Type of protective coating | top | film without logo | slate | |||
| string | logo film | film with logo | ||||
** Reference information *** Deviations on the maximum tensile force, along / across, more than +200 N are allowed.
Mounting method:
Fusion.
Storage:
Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters.
| Indicator Names | IMPER STANDARD (T) * B | IMPER STANDARD (T) * N | IMPER STANDARD (X) * B | IMPER STANDARD (X) * N |
| Roll area, not less, m 2 | 10 | 15 | 10 | 15 |
| Weight, kg / m 2 | 4.0 | 3.0 | 4.0 | 3.0 |
| Coil weight, kg | 38.9 | 45 | 38.8 | 45 |
| Number of rolls on a pallet, pcs. | 25 | 25 | 25 | 25 |
| Weight of rolls on a pallet, kg | 972.5 | 1125 | 970 | 1125 |
| Quantity on a pallet, m 2 | 250 | 375 | 250 | 375 |
Works:
According to SP 17.13330.2017 and SP 71.13330.2017. It can be used in all climatic regions according to SP 131.13330.2018.LOOKING WITH THIS PRODUCT
